Tribal leaking...

[melenco4]

Ok at dday I brought this tribal over to you guys so you could tell me what was wrong with it but ohhh hell no it didn't leak then, but now I go to use it and it is... same spot it isn't the solonoid but more inside took it all apart and lubed it it stopped but shot it again and it started...lol any suggestions?

[usagi_tetsu]

Might be the AOC/LPR set too high if it's leaking out the top of the grip frame. Otherwise, make sure all your o-rings are in good shape, and have no nicks in 'em.

[shiftycastro]

sometimes the regular orings will not get a good enough seal ..... i have had to put a little piece of twisted thread tape in the oring groove.
then put the orings back on ..... push them down a little bit work them back in the groove. make sure you lube it up real good and then put back in ....usually seals right up

[kytracker]

Take the grip frame off, unhook the solenoid plug, set the grip frame & all electronic off to the side. Air the marker up, put a little soapie water around the solenoid to make sure it's not leaking, then check the Body/valve guide body screw for leaks. Sometime you can screw the Valve screw into far and it pushes the front valve o-rings up & it leaks. If it's in the grip frame that's the only two things that leak. You can also check for leaks around the Vertical adapter at this time. :bunny_4:

Find the leak, then turn the air off, then push the solenoid button to let the air out of your marker.

[melenco4]

Fixed it thanks for the help guys and am going to sell it jus aquired a freestyle for 250 nothing wrong with freestyle either....