i havent used it in a while.

[deublez]

hey guys whats going on, i am writing in dire need of some help with my tribal... now i know if i send it to tribal heaven "warpedairsmithing" i know it willl work but i want to try this one solo. i have the marker setup to work at like 250 fps and i dont change anything. i use an angel air digital so i put 300 psi into it and my microrock is set to whatever. whenever i used to air up you could heard it fill up and then i would turn it on and it would work like a charm. the last time i tried to turn it on, i aired it up set it to the normal settings, and i could not get it shooting any higher than 175fps, i dont know whats wrong with it but it is kinda pissing me off. when i had the problem i tinkered with the lpr and hpr and nothing, so i set it to the universal settings and havent touched it yet... any ideas please help. thanks
k

[deublez]

i forgot to tell you one thing, i had the problem in like the first week of december and i havent tried to fix it since.

[warpedmephisto]

You will want to run your tank output at least 200-300 psi over the output of your HPR. (If your HPR is outputting 200 psi, you want your tank outputting 4-500 psi) Try setting your HPR to 200, LPR to 95 and then adjust your velocity with your HPR.

[shiftycastro]

i would also check the valve screw.....i have had one come completely come out and the valve turned around in the shaft.
could be the noid as well , but try fix the cheaper stuff first so you only have to do this as a last resort.

[~kaos~]

I was wondering along the lines of the HPR thing too..... Only since he didn't mention an HPR I thought he might be using the Angel Air as the HPR & running it thru a gas-thru-grip. In that case I was going to suggest he lower the Angel Air reg to 200-220. However if he's got an HPR set at 200-220 I was going to suggest (like andy) setting his tank reg @ 500-600psi. Guess we'll just wait and see what happens.

[deublez]

if you go back into the forun and look it is a tribal twister, with the stock selnoid im sure of it, it has morlock but i dont think that has anyhting to do with it, i think there is somethign wrong with my hammer and sear, like something is stuck or something is not getting enough air. i used to shoot a cocker and my tribal was my main gun now it dosent work and i sold my cocker for a 06 speed, a gat, now i have my tribal and a gat!

[JaKaL]

gah!! [shivers] :barf1:

Please don't use the "g" word.