Trigger Pull

[ICantBelieveIt]

I just got my 2.2 Twister today....anyhow..the trigger pull seems to be a bit heavy.......is there a return sprign i am pulling agains? or some type of adjustment that i can do to get most of the slack out? so the pull is short and crisp as it is not...its not too easy to walk...for me at least

[~kaos~]

Boy.... you have been gone a long time.
The stock trigger spring is a 'pig', get it outta there. You'll need to remove the gripframe and then knock out the trigger pin. Once that's done there are 3 choices to replace it with:
~ pen spring mod. like the name implies.... find one of those clicky pens and take the spring out. Clip it down probably almost in 1/2, put it in and test the pull and tweek from there.
~ Magnet mod. You can hunt around for them or contact Warped.
~ No Spring..... just use the resistance from the microswitch spring. If you choose this method make sure you set the trigger stop right, Just enuff to click the switch and not much more.

As for trigger pull length, you should see a small hole in the front/top portion of your trigger. There is an allen set screw in there. Turning clockwise makes it contact the microswitch sooner giving you a shorter pull.
That's pretty much it.

[Edwin]

What he said.

[ICantBelieveIt]

awesome took the spring out...and that is exactly what i was looking for...now what should i set my dwell settings to for maximum performance???
thanks again.....
oh yea i have the 8 switch board V1E
it also has some side to side play what can i use to shim that up with out making the trigger to tight?

[~kaos~]

I think most ppl here that have stock boards like the dwell @ 14.
Never had a sloppy Tribal trigger, but shimmed up a Bushy once..... got a small washer, some wet/dry sandpaper and a flat surface. Put the sandpaper down on the flat surface, toss the washer on it, put your finger on the washer and start going round ina circle. (guess you could go back & forth too) And yes, the tip of your finger will get sanded a little.

[ICantBelieveIt]

its not flopping around.....its just a little side to side movement...i reember warped got the slop out of my mephisto trigger and it felt very nice