reaccuring problem

[outreach]

well i believe its just wearing out of the noids but anyway, my noids are leaking as if there is way to much pressure going through them, yet thier isnt very much pressure going through them at all not even enough to cock them any one know why?

[Edwin]

If you don't have enough pressure to cock the marker then your most likely just venting air out of the noid. There is a minimum pressure for the noid to operate, and I believe that is 45psi.

I forget what they call the noid type, but since it only has one coil used to pull the noid core, air pressure must be used to push the core back. So if you don't have enough pressure it may stay in the wrong place, therefore vent out the vent holes of the noid.

[outreach]

well i was thinking that but it will shoot yet continueosly leak from the noid from the time i let the littlest amount of air through

[Edwin]

What is your setup (HPR, LPR, etc)
Post a picture of it, so we can help diagnois.

[outreach]

jackhammer II lpr

[Edwin]

Boy that was very descriptive. Thanks!!!

[outreach]

sorry i got kicked of when i started typing then forgot about the post when i got back on, its in the F/S section the chopped mephisto. i had it working one day then the next pshhhhhhhhhhh.