pins..

[bakerboy4679]

http://img80.exs.cx/img80/9172/pict00042dc.th.jpg (http://img80.exs.cx/my.php?loc=img80&image=pict00042dc.jpg)

how the hell do i get these things out?

[warpedmephisto]

Take a punch (or small nail, broken off drill bit/allen wrench, etc) or something just really hard and hammer them out from the right side of the frame (very important!). The pins have a knurled end which will only come out from one side. Don't be afraid to get rough with it as some of the pins are just a pain in the ass to get out.

[Edwin]

Quick addition to Andy's Instruction.

When it starts to move out a little make sure that the end that is poking out is knurled. If it is smooth then you may be tapping it out the wrong side (sometimes people put them in backwards).

[bakerboy4679]

ok thanks i'll try it now

Edit: yay! 30 sec. later it works.. but the 2 small ones for the switch are still in there, there a bit harder to get out. I used a small allen wrench and an adjustable wrench and put 2 & 2 together..

lol.. i could convert my single frame to a double... just cut off the gaurd, put a double trigger on it... SINCE NOONE WILL SELL ME A FRAME *HINT-FREAKIN-HINT*

[bakerboy4679]

haha i took my trigger return spring out, maybe it'll be a tad bit easier to shoot(faster)

[bullschmidt2k3]

I'll sell you a trigger when I'm done making some, then you just gota worry about the trigger guard.

I accidently tapped my pins out from the left side last night... hope I didn't damamge the frame...

[bakerboy4679]

naa im prolly gonna be getting a Angel frame.. or perhaps some other frame(aftermarket).. so if anyone has somehting they will sell.. lmk..