tilpr

[outreach]

were abouts do i have to drill and tap this hole? and is there a chance i may kill my body

[usagi_tetsu]

Iffen I remember correctly, the hole you're talking about is the one underneath the ASA the HPR screws into. Most people just wad up a small ball of teflon tape and stuff it in there, but it's probably best to get the tap and screw. Chances of screwing up your body: slight, just make sure to get the proper size tap and screw.

[~kaos~]

Iffen I remember correctly, the hole you're talking about is the one underneath the ASA the HPR screws into. Most people just wad up a small ball of teflon tape and stuff it in there, but it's probably best to get the tap and screw. Chances of screwing up your body: slight, just make sure to get the proper size tap and screw.
*lol* as Usagi sez drill & tap is the proper way but i prefer the wad of teflon tape only because i tend to switch things around or take the 'good stuff' off before selling. no muss no fuss.....

[outreach]

i see, so its not a big deal, i was worried for a bit about having to drill another hole into me body

[Edwin]

Thanks guys...yep teflon or electrical tape will do. You have to make sure you stuff it in the hole a little. It is only 100psi or so therefore tape plus the pressure of the ASA will seal it.

Drill and tap also works.....

[outreach]

ill need to drill and tap as im hopping to put a 15 degree asa