usagi_tetsu
01-25-2008, 03:53 PM
Hey guys, just noticed that Doc (of Doc's Machine and The Whiteboard fame) is offering his micro fitting wrench again, which are screamingly useful if you have a 'cocker, and he even mentions Tribals by name for possible markers that can use these. Stock configuration models don't need one, but if you have an LPR on an LPR adapter, you probably have at least one microline fitting (if not two or three) that could be wrenched with this. Check them out here (http://www.docsmachine.com/tees/) at the very bottom of the page next to the coveted 'mag to 'cocker barrel adapters. And check out the tee-shirts while you're there, I have a large collection of them and they're very popular at the local fields, especially the "I *club* Cheaters" one.
Oh, and if you haven't dealt with Doc lately, patience should be your watchword. Whole metric tonnes of patience. But worth it. The 'mag to 'cocker barrel adapter I got is very, very nice.
Oh, and if you haven't dealt with Doc lately, patience should be your watchword. Whole metric tonnes of patience. But worth it. The 'mag to 'cocker barrel adapter I got is very, very nice.