L@@K what I found in my Fluster.....

[~kaos~]

OK.... in my almost 10 years of dealing with Tribals I have never seen the likes of what I pulled out of that Fluster project I picked up from Shifty. That ram wasn't loc-tited but is was jammed. A little oil and some luck and I was able to pull it out. And boy was I surprized! This ram has had more venting holes added and the front ones have some channeling. I'm not sure exactly what the shaft is made of but it's light. I'm not positive but it looks like the I.D. of the ram could be just a bit larger too.

http://img129.imageshack.us/img129/4349/00001cs9.jpg

[shiftycastro]

When I bought that from a guy.....It came with 2 additional rams that had been taken apart and modified to a degree. I will try to get pics later of it.

[~kaos~]

I'm very interested in getting this up and running so I can see what kind of pressure ends up being needed to operate it. Definitely cool......

[Spitlebug]

That looks very similar to what I plan for the rammer. New Designz made an impulse ram that looked very similar. Now if I could only get my ram out of the marker...

http://www.newdesignz.com/Pics/art_Impulse_RH.jpg

[~kaos~]

I seem to be pretty good at getting rams out.... :)

[Spitlebug]

I seem to be pretty good at getting rams out.... :)

I used a pair of snap ring pliers. Now I just have to get the litt;e brass screw out the back to take the ram apart...

Might need an easy out to do it. Damn brass is so soft...