Jakesak
03-01-2005, 08:14 PM
How to change the AOC.
First take off the aoc cap. Next remove the asa via the asa screw. Remove the plunger along with the spring and the aoc. There might be a set screw on the side body of the aoc. If so loosen it. This in turn will loosen the aoc screw. Turn the screw in to increase the persure, out to decrease the persure. Return the aoc/spring/plunger and screw in the asa. YOU WILL NEED A GAUGE! to do it right. The perfect pressure is around 95-105. Once you get that pressure, remove the aoc again, put loctite on the set screw, let dry and replace it into the body.
First take off the aoc cap. Next remove the asa via the asa screw. Remove the plunger along with the spring and the aoc. There might be a set screw on the side body of the aoc. If so loosen it. This in turn will loosen the aoc screw. Turn the screw in to increase the persure, out to decrease the persure. Return the aoc/spring/plunger and screw in the asa. YOU WILL NEED A GAUGE! to do it right. The perfect pressure is around 95-105. Once you get that pressure, remove the aoc again, put loctite on the set screw, let dry and replace it into the body.