questions about noid and fury chip

[jeremy.sears]

Ok two seperate questions:

1: When you clean the noid, should you greese it alot, a little, or not at all, and if so is dow 33 good or should you use some kind of oil or lithium greese or something else all together. I have narrowed trifade to the noid (noid from crome bbt made it work just fine). It pushes the bolt forward and it sticks, yesterday it would shoot about 5 times then stick forward. I had tried to clean and lube it with dow33.

2: What if any is a good way to reduce bounce with the fury chip?

[Edwin]

I usually lube with the Warped special sauce. 50/50 of Gold CUp and Dow 33. I dab just a little on my fingertips and "wet" the orings with the sauce. Very little I use.

I have been wondering what lube Parker uses for years!!! Maybe Haveblue knows.

2. Umm I don't know.

[warpedmephisto]

I saw some Parker brand pneumatic grease at my uncle's once (got it from work I suppose) but it seemed to be pretty thick and almost like a sludge. I've grown away from the 50/50 mix and just use straight dow33 now.

As far as bounce on a Fury chip, is it mechanical or electrical bounce? If its mechanical try putting a stiffer spring on your trigger or reduce the amount of recoil the marker has. If it is electrical bounce, you might have to find a less bouncy switch or add a capacitor to it much like Have Blue does on the Warlord boardsets. He will be able to inform you better on those than I can.

[jeremy.sears]

I think it is a mix of both but Im really not sure it has happened on both my twister and my mephisto as soon as I put in the fury chip but I also added the lighter swith and magnetic trigger return at the same time. I actually ran into a guy that used to hang out at ***, he had a red twister with fury and he said he had to turn down the MROF to 18 and it cleared it up on his. I never thought of that but it sounds reasanable so I will try that on the Mephisto.

Hey warped, let me know if the eyes cleared up some of the bouncy problem on the twister, or is it still real bouncy?

[warpedmephisto]

I've had no problems with it bouncing so far. I still have to tune it this week and get it back out to you. Its been long overdue!

[jeremy.sears]

you warned me that it would take awhile. I know the work will be great and I am looking forward to getting it. Just let me know when you want me to send the payment and how much it will be

[jeremy.sears]

ok it helps if you remember to set the switches once you put in a fury chip, it was set up on auto response :P.

I dont know what it is, but now the fluster and the trifade are doing the same thing, bolt sticking forward :P if I didnt get the other three tribals working just perfect I would think I was doing something backwards. almost to the point of sending them off. but I hate doing that I like to fix things myself

[Edwin]

Start a new thread on your bolt problem, and we will try to figure it out.