PDA

View Full Version : new spring


Chris
06-24-2005, 07:53 AM
Yesterday i was talking to a buddy and i was complaining and always have been about the tribal trigger(tension and things) and i thought i couldnt increase it or whatever but at the time not thinking of looking at the trigger spring and adjustment screws i tweaked the tribal to be one of the fastest guns i have seen. The first time we put air in it and touched the trigger it went full auto when set on semi on the fury. After a while of adjustment we have it some what legal, but i realized after shooting again that once u start walking the gun will walk itself. I now am full of smiles when shooting my twister. Now just have to fix my gladiator problem which is in the Q/A thread.
Chris :stomper: :stomper:

bakerboy4679
06-24-2005, 12:12 PM
Bounce is great aint it?!

Looks like someone is ramping.... hehehe..

must be a damn sensitive trigger to have that much bounce!!

Chris
06-24-2005, 08:55 PM
its a stock proto matrix spring. Lighter and more sensitive than ball point pen spring.
Chris

jeremy.sears
06-24-2005, 09:06 PM
I ended up getting a couple of small earth magnets from radio shack and replaced the spring, works great

bakerboy4679
06-24-2005, 09:17 PM
I ended up getting a couple of small earth magnets from radio shack and replaced the spring, works great

I can tell you used some in the Mephy you sold me!! BunkerzU is now doing magnetic mods to his guns(and mine) :bdaybigg:

jeremy.sears
06-25-2005, 07:06 AM
oh and warped sells a magnetic kit that comes with a smaller grub screw and small gold magnet that makes it adjustable (with a hole drilled n tapped) I put two of his kits into a couple of my tribals they are nice kits

Edwin
06-25-2005, 01:09 PM
I have a couple with out springs period!!!

The spring in the switch is sometimes good enough. I wouldn't recommend removing the spring in Woodsball as it is too sensitive.

I have a couple Tribals setup with the stock spring for rec/woods ball use.