Equotip D Portable Metal Hardness Tester

Equotip Harness Tester

The Equotip harness tester is designed for testing metallic materials the hardness of which ranges from low to very high values. Hardness testing can be performed directly on-site and in any position. Typical applications for the Equotip instrument are large, heavy work pieces which are difficult to access. It is especially suitable for application in which static harness testing is either not feasible or not economical, but not limited to these applications. Small lightweight applications are also possible. Please refer to manual for all specifications.

Equotip Measuring Method

The hardness measurement carried out with the Equotip hardness tester is a dynamic method predicated upon the principle of energy measurement (EQUO = E nergy - QUO tient ). During a hardness test, an impact body, equipped with a spherically shaped tungsten carbide test tip impacts under spring force against the test surface from which it rebounds. Impact and rebound velocities are measured in a contact less manner at the precise moment, when the spherically shaped tungsten carbide test tip is located approximately 1mm from the test surface. The measurement values derived from the impact and rebound velocities are processed into the hardness value of number L by the indicating device.

Equotip Harness Value converts to:

  • Harness Brinell
  • Hardness Vickers
  • Hardness Rockwell B Scale
  • Hardness Rockwell C Scale
  • Hardness Shore

For more information please refer to the included conversion manual

This Auction:

  • Everything shown in the following pictures
  • Calibration Report and Sticker in your personal or company name. Report will be done at the end of the auction, so a full 1 year calibration is included.
  • This harness tester was tested and is fully functional as described by the manufacturer, and operates to those specifications.
  • Since the unit will be calibrated before shipping it will receive a final test assuring that you receive a perfect hardness tester.
  • This unit is in EXCELLET shape as seen in the pictures below.

Includes :

Equotip Indicating Device
Impact Device D
Impact Device Cable (2-Pole 1.5m)
D6 Support Ring
D6a Support Ring
Impact Standard D (Almost new-2 Sided)
Coupling Paste
Cleaning Brush
Operation Manual
Conversion Manual
Carrying Case (pictured below)
Calibration Certificate (1 year with your name listed)
Calibration Sticker

Large View of Equotip Items