All the benifits of Delrin plus: Teflon greatly increases lubricity for reduced overall friction providing a very slick bolt.
The paintball staple!!!
High natural lubricity, excellent mechanical stability, low moisture absorption, and abrasion resistant.
Self Lubricating Characteristics with the addiction of MDS to increase mechanical performance.
If you want the bolt to better cup the ball please specify an "60 Chamfer."
(Rocket Valve Style Shown)
Adds extreme amounts of low pressure volume, and helps reduce cocking pressure of Tribal Markers.
Replaces your existing AOC completely (except valve spring), and must be used with a LPR mounted on the ASA (see photo)
Adds extreme amounts of low pressure volume, and helps reduce cocking pressure of Tribal Markers.
Works with your existing AOC. No modifications needed!!! Just remove your AOC cap and attach AOC LPC.
Highest flow available for a stock AOC.
Highest flow available when used with aftermarket LPR.
Features:
1. Externally adjustable low pressure regulator.
2. LP volumizer/chamber.
3. Allen wrench adjustment
4. Turney Cap
5. Replaces Tribal AOC
6. Hoseless operation
7. No modifications to Tribal markers to use
1. Externally adjustable low pressure regulator.
2. LP volumizer/chamber.
3. Allen wrench adjustment
4. Turney Cap
5. Replaces Tribal AOC
6. Hoseless operation
7. No modifications to Tribal markers to use
Used to measure your low pressure/cocking pressure of any LPR with 1/16" Dia ID hose. A very small and compact tool that should be in everyone's tool box.
Used to measure your low pressure/cocking pressure of any LPR with 1/16" Dia ID hose. A very small and compact tool that should be in everyone's tool box.
(Board Only)
Features:1. Adds
Anti-Chop-Eyes (ACE) to (pratically) any paintball board set
that fires a marker with a 5V pulse to the solenoid. Specifically
designed as an economical mod to add eyes to Stock Tribal board sets.
2. Works with ASP
Warlord Eye.
3. Works with Break
Beam Eye.
4. Has disable switch
input.
5. Has a "Ball
Present" LED output.
6. Extra pads for
Aux. 5 Volts.
7.
Very Small!!!
IMPORTANT NOTE: This board was designed specifically for Tribals. Tribals send a low signal to switch a transistor that fires the solenoid. Some markers require a high signal to switch the transistor to fire the Marker. Warped Airsmithing has learned that some Angel boards require the high signal, and is testing a modified board.
Installation Documents:
Break Beam Detector Package
Break Beam PCB Information
Eye Kit Installation Notes
Break Beam Eye Drill Location
Micro Board cut magenta trace
Assembled V1E and Eye Board
Warped Airsmithing does installs.
IMPORTANT NOTE: This board was designed specifically for Tribals. Tribals send a low signal to switch a transistor that fires the solenoid. Some markers require a high signal to switch the transistor to fire the Marker. Warped Airsmithing has learned that some Angel boards require the high signal, and is testing a modified board.
Installation Documents:
Break Beam Detector Package
Break Beam PCB Information
Eye Kit Installation Notes
Break Beam Eye Drill Location
Micro Board cut magenta trace
Assembled V1E and Eye Board
Warped Airsmithing does installs.
(Break Beam Kit)
Includes:
1. Edwin's ACE Board
2. Enough wire to Install
3. Eye Emitter
4. Eye Receiver
5. Red Eye On/Off LED
6. On/Off Slide Switch with Screws
Note: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
1. Edwin's ACE Board
2. Enough wire to Install
3. Eye Emitter
4. Eye Receiver
5. Red Eye On/Off LED
6. On/Off Slide Switch with Screws
Note: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
(Airsoldier Warlord Eye Kit)
Includes:
1. Edwin's ACE
Board
2. Enough wire to
Install
3. Airsoldiers
Reflective Warlord Eye
4. Red Eye On/Off
LED
5. On/Off Slide
Switch with Screws
Note: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
Note: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
