Tribal Internal Low Pressure Regulator (TILPR)
(New Lower Price)
Worlds first externally adjustable LPR for Tribals that fits completely inside the body. It replaces the stock AOC and has an adjustment range from 0- 150 psi. The TILPR also increases the volume of your Low Pressure over the stock AOC, so it is technically a regulating chamber too!!!
Slight modification needed: Drill and Tap one hole and plug with set screw (drill, tap and set screw available for $5.00 extra)
Tribal Threaded CCM Heli-Clamp Feedneck
No-Rise
(New Lower Price)
Tribal Threaded CCM Heli-Clamp Feedneck
No-Pro
(New Lower Price)
Custom Ram Assist Spring
Remove Ram FSDO and make your tribal more consistant. Compatible with ASP ram buffer.
All the benifits of Delrin plus the addition of Teflon to greatly increase lubricity for reduced overall friction providing a very slick bolt.
Please email for details!!!
The paintball staple!!!
High natural lubricity, excellent mechanical stability, low moisture absorption, and abrasion resistant.
Teflon Impregnated Delrin Bolt
Our error in machining benifits your wallet!!!
One drill operation that went a little too deep cause the error. It won't effect operation or efficency that much, if any, but it will give you finacial relief over the standard price.
For use with the Rocket Valve Style Shown
Adds extreme amounts of low pressure volume, and helps reduce cocking pressure of Tribal Markers.
Replaces your existing AOC completely, and must be used with a LPR mounted on the ASA (see photo)
Please email for details!!!
For use with the Stock Valve Types
Adds extreme amounts of low pressure volume, and helps reduce cocking pressure of Tribal Markers.
Replaces your existing AOC completely (except valve spring), and must be used with a LPR mounted on the ASA (see above photo)
Please email for details!!!
(New Lower Price)
Adds extreme amounts of low pressure volume, and helps reduce cocking pressure of Tribal Markers.
Works with your existing AOC. No modifications needed!!! Just remove your AOC cap and attach AOC LPC.
Drilled 0.220"
Highest flow available for a stock AOC.
Drilled 0.250"
Highest flow available when used with aftermarket LPR or LPRC.
Features:
1. Externally adjustable low pressure regulator.
2. LP volumizer/chamber.
3. Allen wrench adjustment
4. Turney Cap
5. Replaces Tribal AOC
6. Hoseless operation
7. No modifications to Tribal markers to use
1. Externally adjustable low pressure regulator.
2. LP volumizer/chamber.
3. Allen wrench adjustment
4. Turney Cap
5. Replaces Tribal AOC
6. Hoseless operation
7. No modifications to Tribal markers to use
Used to measure your low pressure/cocking pressure of any LPR with 1/16" Dia ID hose. A very small and compact tool that should be in everyone's tool box.
Used to measure your low pressure/cocking pressure of any LPR with 1/16" Dia ID hose. A very small and compact tool that should be in everyone's tool box.
Edwin's
ACE Board
(Board Only)
1. Adds
Anti-Chop-Eyes (ACE) to (pratically) any paintball board set
that fires a marker with a 5V pulse to the solenoid. Specifically
designed as an economical mod to add eyes to Stock Tribal board sets.
2. Works with ASP
Warlord Eye.
3. Works with Break
Beam Eye.
4. Has disable switch
input.
5. Has a "Ball
Present" LED output.
6. Extra pads for
Aux. 5 Volts.
7.
Very Small!!!IMPORTANT NOTE: This board was designed specifically for Tribals. Tribals send a low signal to switch a transistor that fires the solenoid. Some markers require a high signal to switch the transistor to fire the Marker. Warped Airsmithing has learned that some Angel boards require the high signal, and is testing a modified board.
Installation Documents:
Break Beam Detector Package
Break Beam PCB Information
Eye Kit Installation Notes
Break Beam Eye Drill Location
Micro Board cut magenta trace
Assembled V1E and Eye Board
Warped Airsmithing does installs.
Edwin's
ACE Board
(Break Beam Kit)
Includes:(Break Beam Kit)
1. Edwin's ACE Board
2. Enough wire to Install
3. Eye Emitter
4. Eye Receiver
5. Red Eye On/Off LED
6. On/Off Slide Switch with Screws
Note: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
Edwin's
ACE Board
(Airsoldier Warlord Eye Kit)
(Airsoldier Warlord Eye Kit)
Includes:
1. Edwin's ACE
Board
2. Enough wire to
Install
3. Airsoldiers
Reflective Warlord Eye
4. Red Eye On/Off
LED
5. On/Off Slide
Switch with ScrewsNote: Soldering of very small wires is required to assemble this kit. It is the raw components that are needed to add eyes to your marker. The surface mount components are already soldered to the board.
Warped Airsmithing does installs.
(New Lower Price)
Black Logo on XL White Shirt
Logo is on the back of the shirt
(New Lower Price)
White Logo on XL Black Shirt
Logo is on the back of the shirt
2137 Sutherland Place
Harvey, LA 70058
Questions and/or Comments: Please
email (replace '2' with '@') edwin2tribal-paintball.com
My Markers: Edwin's Tribals
My Markers: Edwin's Tribals